Continuous BLE skimmer detection for ESP32-C5 boards, always-on skimmer hunting.
Detection only. Vord C5 passively listens for and flags suspicious BLE signatures — An educational tool: a match is a signal to be cautious, not proof.
Select your exact hardware profile. The installer validates the connected chip before writing.
If flashing fails, hold BOOT, tap RESET, release BOOT, then retry.
The ESP32-WROOM-32 build is the optional classic-Bluetooth companion that sits beside a C5 board and forwards BR/EDR skimmer hits over UART — it is not a standalone detector. Wiring & setup →
Watch your board's live serial output — boot info, the AP address, and the heap-health log. If a WROOM-32 classic-BT scout is wired to the C5, its traffic is relayed through the C5 and tagged [wroom]; use the Source filter to view C5 only, the scout only, or both. Works on any flashed board; close the flash dialog first so the serial port is free.